Asus P8Z77-V PRO/THUNDERBOLT User Manual Download Page 52

Page: 52 / 192

2-28

Chapter 2: Hardware information

Chapter 2

CPU and chassis fan connectors

(4-pin CPU_FAN; 4-pin CPU_OPT;4-pin CHA_FAN1-3)

Connect the fan cables to the fan connectors on the motherboard, ensuring that the

black wire of each cable matches the ground pin of the connector.

•

The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.

•

All the CPU and CHA fans support ASUS Fan Xpert 2 feature.

•

If you install two VGA cards, we recommend that you plug the rear chassis fan cable

to the motherboard connector labeled CHA_FAN1-3 for better thermal environment.

Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the

system may damage the motherboard components. These are not jumpers! Do not place

jumper caps on the fan connectors!

Summary of Contents for P8Z77-V PRO/THUNDERBOLT

































































































































































































Search results

Summary of Contents for P8Z77-V PRO/THUNDERBOLT

Reviews:

Brands by name

Popular brands

Asus P8Z77-V PRO/THUNDERBOLT, User Manual

Search results

Summary of Contents for P8Z77-V PRO/THUNDERBOLT

Reviews:

Brands by name

Popular brands