Asus P5Q3 Deluxe/WiFi-AP@n User Manual Download Page 184

Page: 184 / 190

4-70

Chapter 4: Software support

To install the RAID driver in Windows XP:

1. During the OS installation, the system prompts you to press the <F6> key to

install third-party SCSI or RAID driver.

2. Press <F6> then insert the floppy disk with RAID driver into the floppy disk

drive.

3. When prompted to select the SCSI adapter to install, make sure you select

Intel(R) SATA RAID Controller (Desktop ICH10R)

4. Follow the succeeding screen instructions to complete the installation.

To install the RAID driver in Windows

Vista:

1. Insert the floppy disk/USB device with RAID driver into the floppy disk drive/USB

port.

2. During the OS installation, select

Intel(R) SATA RAID Controller (Desktop

ICH10R).

3. Follow the succeeding screen instructions to complete the installation.

Summary of Contents for P5Q3 Deluxe/WiFi-AP@n































































































































































































Search results

Summary of Contents for P5Q3 Deluxe/WiFi-AP@n

Reviews:

Asus P5Q3 Deluxe/WiFi-AP@n, User Manual, Page: 184 / 190

Search results

Summary of Contents for P5Q3 Deluxe/WiFi-AP@n

Reviews: