Asus P5Q3 Deluxe/WiFi-AP@n User Manual Download Page 136

Page: 136 / 190

4-22

Chapter 4: Software support

Click to get the calibration between

the fan rotation and fan speed ratio

Click to close the Calibration window

Fan profile modes

•

Disable:

Select this mode to disable the

Fan Xpert

function.

•

Standard:

This mode makes the fan adjust speed in moderate pattern.

•

Silent:

This mode minimizes fan speed for quiet fan operation.

•

Turbo:

This mode boosts the fan to achieve maximal fan speed for the best

cooling effect.

•

Intelligent:

This mode automatically adjusts the CPU fan speed with the

ambient temperature.

•

Stable:

This mode keeps the CPU fan at the same speed to avoid noise

caused by the unsteady fan rotation. However, the fan will speed up

when the temperature exceeds 70ºC.

•

User:

This mode allows you to change the CPU fan profile under certain

limitation.

For

Chassis Fan

, only Disable/Standard/Silent/Turbo modes could be selected.

Summary of Contents for P5Q3 Deluxe/WiFi-AP@n































































































































































































Search results

Summary of Contents for P5Q3 Deluxe/WiFi-AP@n

Reviews:

Asus P5Q3 Deluxe/WiFi-AP@n, User Manual, Page: 136 / 190

Search results

Summary of Contents for P5Q3 Deluxe/WiFi-AP@n

Reviews: