Asus P5Q3 Deluxe/WiFi-AP@n User Manual Download Page 110

Page: 110 / 190

3-40

Chapter 3: BIOS setup

3.8.3

ASUS O.C. Profile

This item allows you to store or load multiple BIOS settings.

Save to Profle 1/2

Allows you to save the current BIOS file to the BIOS Flash. Press <Enter> to save

the file.

Load from Profile 1/2

Allows you to load the previous BIOS settings saved in the BIOS Flash. Press

<Enter> to load the file.

Start O.C. Profile

Allows you to run the utility to save and load CMOS. Press <Enter> to run the

utility.

ASUSTek O.C. Profile Utility V1.25

Current CMOS

Restore CMOS

Note

[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit

PATH:

A:\

BOARD:

P5Q3 DELUXE

VER:

0304

DATE:

05/12/2008

BOARD:

Unknown

VER:

Unknown

DATE:

Unknown

• This function can support devices such as a USB flash disk or a floppy disk

with FAT 32/16 format and single partition only.

• DO NOT shut down or reset the system while updating the BIOS to prevent

the system boot failure!

BIOS SETUP UTILITY

Tools

O.C. PROFILE Configuration

O.C. Profile 1 Status : Not Installed

O.C. Profile 2 Status : Not Installed

Save to Profile 1

Load from Profile 1

Save to Profile 2

Load from Profile 2

Start O.C. Profile

Save BIOS settings

to Profile 1

Summary of Contents for P5Q3 Deluxe/WiFi-AP@n































































































































































































Search results

Summary of Contents for P5Q3 Deluxe/WiFi-AP@n

Reviews:

Asus P5Q3 Deluxe/WiFi-AP@n, User Manual, Page: 110 / 190

Search results

Summary of Contents for P5Q3 Deluxe/WiFi-AP@n

Reviews: