manualshive.com logo in svg

Asus P5Q3 Deluxe/WiFi-AP@n, User Manual, Page: 178 / 190

Share
Download
Asus P5Q3 Deluxe/WiFi-AP@n User Manual Download Page 178

4-64

Chapter 4: Software support

6.  Use the up/down arrow key to select the stripe size for the RAID 0 array, and 

then press <Enter>. The available stripe size values range from 4 KB to 128 

KB. The default stripe size is 128 KB.

We recommend a lower stripe size for server systems, and a higher stripe size 

for multimedia computer systems used mainly for audio and video editing.

7.  Enter the RAID volume capacity that you want and press <Enter>. The default 

value indicates the maximum capacity allowed.

8.  Press <Enter> when the Create Volume item is highlighted. The following 

warning message appears.

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N):

9.  Press <Y> to create the RAID volume and return to the main menu, or <N> to 

go back to the Create Volume menu.

Summary of Contents for P5Q3 Deluxe/WiFi-AP@n































































































































































































Reviews:

No comments