manualshive.com logo in svg

Asus P5Q3 Deluxe/WiFi-AP@n, User Manual, Page: 105 / 190

Share
Download
Asus P5Q3 Deluxe/WiFi-AP@n User Manual Download Page 105

ASUS P5Q3 Deluxe WiFi-AP@n

3-35

3.7.2 

Boot Settings Configuration

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some power on self tests (POST) while 

booting to decrease the time needed to boot the system. When set to [Disabled], 

BIOS performs all the POST items.  

Configuration options: [Disabled] [Enabled]

Full Screen Logo [Enabled]

This allows you to enable or disable the full screen logo display feature. 

Configuration options: [Disabled] [Enabled]

Set this item to [Enabled] to use the ASUS MyLogo 3 feature.

AddOn ROM Display Mode [Force BIOS]

Sets the display mode for option ROM. 

Configuration options: [Force BIOS] [Keep Current]

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock.  

Configuration options: [Off] [On]

Wait for ‘F1’ If Error [Enabled]

When set to [Enabled], the system waits for the <F1> key to be pressed when error 

occurs.  

Configuration options: [Disabled] [Enabled]

Hit ‘DEL’ Message Display [Enabled]

When set to [Enabled], the system displays the message “Press DEL to run Setup” 

during POST.  

Configuration options: [Disabled] [Enabled]

   Select Screen

    Select Item

+-

   Change Option

F1   General Help

F10   Save and Exit

ESC   Exit

v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.

Boot Settings Configuration

Quick Boot  

[Enabled]

Full Screen Logo 

[Enabled]

AddOn ROM Display Mode 

[Force BIOS]

Bootup Num-Lock 

[On]

Wait for ‘F1’ if Error 

[Enabled]

Hit ‘DEL’ Message Display [Enabled]

Allows BIOS to skip 

certain tests while 

booting. This will 

decrease the time 

needed to boot the 

system.

BIOS SETUP UTILITY

                                               

Boot

Summary of Contents for P5Q3 Deluxe/WiFi-AP@n































































































































































































Reviews:

No comments