Asus Mimic Internet Camera CX200 User Manual Download Page 48

Page: 48 / 94

ASUS CX200 Internet Camera

Manager IP Address
This set the LAN IP address where the administrator can manage ASUS

Mimic CX200 from. It is valid for up to 8 different LAN IP addresses. To

manage ASUS Mimic CX200 from any LAN IP addresses leave the field as

*.*.*.*
Community
This is to set a Community name for NMS. The community name has to

be the same as that set in NMS.
Permission

This is to set the Administrator’s authority. Options are Read, Read/

Write, and No Access.
Description
This is for an Administrator to make notes.

2.4.6 About

The administrator can use this section to check firmware information,

save/restore settings, upgrade firmware and see manufacturer’s details.

About page

Summary of Contents for Mimic Internet Camera CX200






























































































Search results

Summary of Contents for Mimic Internet Camera CX200

Reviews:

Related manuals for Mimic Internet Camera CX200

Brands by name

Popular brands

Asus Mimic Internet Camera CX200, User Manual

Search results

Summary of Contents for Mimic Internet Camera CX200

Reviews:

Related manuals for Mimic Internet Camera CX200

Brands by name

Popular brands