Asus Mimic Internet Camera CX200 User Manual Download Page 17

Page: 17 / 94

ASUS CX200 Internet Camera

2.2.2 Current Connections

The Current Connections page shows all the users currently viewing

either Camera A or Camera B. It also lists the login time and total bytes

received. The user has an option to block the IP or even disable the

account of any errant viewer (An administrator privilege will be required

for this feature).

If you do not have Administrator’s privilege, the IP and Account

details will be hidden.

Current Connections: When logged in with Operator Permission

Click Block IP to block or disable the account of any errant viewer.

To unblock the IP goto Basic Settings → Account Settings → Blocked IP List

and delete the blocked IP Address from the Blocked IP List.

Summary of Contents for Mimic Internet Camera CX200






























































































Search results

Summary of Contents for Mimic Internet Camera CX200

Reviews:

Related manuals for Mimic Internet Camera CX200

Brands by name

Popular brands

Asus Mimic Internet Camera CX200, User Manual

Search results

Summary of Contents for Mimic Internet Camera CX200

Reviews:

Related manuals for Mimic Internet Camera CX200

Brands by name

Popular brands