Asus Mimic Internet Camera CX200 User Manual Download Page 64

Page: 64 / 94

ASUS CX200 Internet Camera

ii. Management Protocol
This setting allows the administrator to determine the LAN HTTP

access (web) to ASUS Mimic CX200 IP camera. For added security, the

administrator can choose to use either the default open port 80 or other

ports (between 1 to 65534).
Once the HTTP port number is set to another port (other than 80), the

full LAN IP address must be entered in order to access the ASUS Mimic

CX200 web interface.
Example:
If a value of say, 8080 is set as the HTTP port number, then enter

http://192.168.0.177:8080 in order to access ASUS Mimic CX200 web

interface.
Uncheck to disable this function.
2.4 Upgrade Firmware

Click this to bring up the upgrade firmware dialog box.
To check the internet for the latest firmware, click Next
Otherwise, check Upgrade the firmware with file saved on the local hard

drive.

Click Browse to choose the location where the *.bin file is located.

2.5 About
Click this button to show the software and version details.

Summary of Contents for Mimic Internet Camera CX200






























































































Search results

Summary of Contents for Mimic Internet Camera CX200

Reviews:

Related manuals for Mimic Internet Camera CX200

Brands by name

Popular brands

Asus Mimic Internet Camera CX200, User Manual

Search results

Summary of Contents for Mimic Internet Camera CX200

Reviews:

Related manuals for Mimic Internet Camera CX200

Brands by name

Popular brands