Asus Maximus iv extreme rev 3 User Manual Download Page 138

Page: 138 / 196

3-46

Chapter 3: BIOS setup

3.10.2 ASUS EZ Flash Utility

The ASUS EZ Flash Utility feature allows you to update the BIOS without having to

use a bootable floppy disk or an OS-based utility.

Before you start using this utility, download the latest BIOS from the ASUS

website at www.asus.com.

To update the BIOS using EZ Flash Utility:

1. Insert the USB flash disk that contains the latest BIOS file to the USB port.

2. Enter the Advanced Mode of the BIOS setup program. Go to the

Enter the Advanced Mode of the BIOS setup program. Go to the

Tool

to select

ASUS EZ Flash Utility

and press <Enter> to enable it.

3. Press <Tab> to switch to the

Drive

field.

4. Press the Up/Down arrow keys to find the USB flash disk that contains the

latest BIOS, and then press <Enter>.

5. Press <Tab> to switch to the

Folder Info

field.

6. Press the Up/Down arrow keys to find the BIOS file, and then press <Enter>

to perform the BIOS update process. Reboot the system when the update

process is done.

Summary of Contents for Maximus iv extreme rev 3





































































































































































































Search results

Summary of Contents for Maximus iv extreme rev 3

Reviews:

Asus Maximus iv extreme rev 3, User Manual, Page: 138 / 196

Search results

Summary of Contents for Maximus iv extreme rev 3

Reviews: