Asus Maximus iv extreme rev 3 User Manual Download Page 115

Page: 115 / 196

ASUS Maximus IV Extreme-Z

3-23

�.�.�

USB Configuration

The items in this menu allow you to change the USB-related features.

The

USB Devices

item shows the auto-detected values. If no USB device is

detected, the item shows

None

Legacy USB Support [Enabled]

[Enabled]

Enables the support for USB devices on legacy operating systems

(OS).

[Disabled]

The USB devices can be used only for the BIOS setup program.

[Auto]

Allows the system to detect the presence of USB devices at

startup. If detected, the USB controller legacy mode is enabled. If

no USB device is detected, the legacy USB support is disabled.

S.M.A.R.T. Status Check [Enabled]

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor

system. When read/write of your hard disk errors occur, this feature allows the hard

disk to report warning messages during the POST.

Configuration options: [Enabled] [Disabled]

Hot Plug [Disabled]

Allows you to enable or disable the hot plug support of the SATA ports.

Configuration options: [Disabled] [Enabled]

Summary of Contents for Maximus iv extreme rev 3





































































































































































































Search results

Summary of Contents for Maximus iv extreme rev 3

Reviews:

Asus Maximus iv extreme rev 3, User Manual, Page: 115 / 196

Search results

Summary of Contents for Maximus iv extreme rev 3

Reviews: