manualshive.com logo in svg

Asus Maximus iv extreme rev 3, User Manual, Page: 134 / 196

Share
Download
Asus Maximus iv extreme rev 3 User Manual Download Page 134

3-42

Chapter 3: BIOS setup

3.10  Updating BIOS

The ASUS website publishes the latest BIOS versions to provide enhancements 

on system stability, compatibility, or performance. However, BIOS updating is 

potentially risky. If there is no problem using the current version of BIOS, 

DO 

NOT manually update the BIOS

. Inappropriate BIOS updating may result in the 

system’s failure to boot. Carefully follow the instructions of this chapter to update 

your BIOS if necessary.

Visit the ASUS website (www.asus.com) to download the latest BIOS file for this 

motherboard.

The following utilities allow you to manage and update the motherboard BIOS 

setup program.
1. 

ASUS Update:

 Updates the BIOS in Windows

®

 environment.

2. 

ASUS EZ Flash 2:

 Updates the BIOS using a USB flash drive.

3.

  ASUS CrashFree BIOS 3: 

Restores the BIOS using the motherboard 

support DVD or a USB flash drive when the BIOS file fails or gets corrupted.

4. 

ASUS BIOS Updater:

 Updates and backups the BIOS in DOS environment 

using the motherboard support DVD and a USB flash disk drive.

Refer to the corresponding sections for details on these utilities.

Save a copy of the original motherboard BIOS file to a USB flash disk in case 

you need to restore the BIOS in the future. Copy the original motherboard BIOS 

using the 

ASUS Update

 or 

BIOS Updater

 utilities.

Summary of Contents for Maximus iv extreme rev 3





































































































































































































Reviews:

No comments