Asus M5A99FX PRO R2.0 Manual Download Page 66

Page: 66 / 178

2-14

Chapter 2: Getting started

Chapter 2

For more BIOS update utilities in BIOS setup, refer to the section Updating BIOS in

Chapter 3.

•

Do not unplug portable disk, power system, or press the CLR_CMOS button while

BIOS update is ongoing, otherwise update will be interrupted. In case of interruption,

please follow the steps again.

•

If the light flashes for five seconds and turns into a solid light, this means that the

BIOS Flashback is not operating properly. This may be caused by improper installation

of the USB storage device and filename/file format error. If this scenario happens,

please restart the system to turn off the light.

•

Updating BIOS may have risks. If the BIOS program is damaged during the process

and results to the system’s failure to boot up, please contact your local ASUS Service

Center.

Summary of Contents for M5A99FX PRO R2.0



















































































































































































Search results

Summary of Contents for M5A99FX PRO R2.0

Reviews:

Asus M5A99FX PRO R2.0, Manual, Page: 66 / 178

Search results

Summary of Contents for M5A99FX PRO R2.0

Reviews: