Asus M5A99FX PRO R2.0 Manual Download Page 48

Page: 48 / 178

1-34

Chapter 1: Product introduction

Chapter 1

Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports

either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel

audio I/O module cable to this connector.

•

We recommend that you connect a high-definition front panel audio module to this

connector to avail of the motherboard’s high-definition audio capability.

•

If you want to connect a high-definition front panel audio module to this connector,

set the

Azalia Front Panel

item in the BIOS setup to

[HD];

if you want to connect an

AC'97 front panel audio module to this connector, set the item to

[AC97]

. By default,

this connector is set to

[HD]

Serial port connector (10-1 pin COM1)

This connector is for a serial (COM) port. Connect the serial port module cable to this

connector, then install the module to a slot opening at the back of the system chassis.

The COM module is purchased separately.

Summary of Contents for M5A99FX PRO R2.0



















































































































































































Search results

Summary of Contents for M5A99FX PRO R2.0

Reviews:

Asus M5A99FX PRO R2.0, Manual, Page: 48 / 178

Search results

Summary of Contents for M5A99FX PRO R2.0

Reviews: