manualshive.com logo in svg

Asus M3A79-T Deluxe - Motherboard - ATX, User Manual, Page: 72 / 164

Share
Download
Asus M3A79-T Deluxe - Motherboard - ATX User Manual Download Page 72

3-8

Chapter 3: BIOS setup

3.1.5 

ASUS CrashFree BIOS 2 utility

The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore 

the BIOS file when it fails or gets corrupted during the updating process. You can 

update a corrupted BIOS file using the motherboard support DVD or the floppy disk 

that contains the updated BIOS file.

Recovering the BIOS from the support DVD

To recover the BIOS from the support DVD:
1.  Turn on the system.
2.  Insert the motherboard support DVD to the optical drive.
3.  The utility displays the following message and automatically checks the DVD 

for the BIOS file.

4.  Restart the system after the utility completes the updating process.

DO NOT shut down or reset the system while updating the BIOS! Doing so can 

cause system boot failure!

 

When found, the utility reads the BIOS file and starts flashing the corrupted 

BIOS file.

Recovering the BIOS from a floppy disk

To recover the BIOS from a floppy disk:
1.  Insert the floppy disk that contains BIOS file to the floppy disk drive.

2.  Turn on the system.

3.  The utility will automatically checks the devices for the BIOS file. When found, 

the utility reads the BIOS file and starts flashing the corrupted BIOS file.

4.  Restart the system after the utility completes the updating process.

Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...

Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy found!
Reading file “M3A79-T.ROM”. Completed.
Start flashing...

•  Prepare the motherboard support DVD or the floppy disk containing the 

updated motherboard BIOS before using this utility.

•  Make sure that you rename the original or updated BIOS file in the floppy 

disk to M3A79-T.ROM..

Summary of Contents for M3A79-T Deluxe - Motherboard - ATX





































































































































































Reviews:

No comments