Asus M3A79-T Deluxe - Motherboard - ATX User Manual Download Page 112

Page: 112 / 164

4-2

Chapter 4: Software support

4.2.2

Drivers menu

The drivers menu shows the available device drivers if the system detects installed

devices. Install the necessary drivers to activate the devices.

ASUS InstAll - Drivers Installation Wizard

Installs all of the drivers through the installation wizard.

AMD Cool ‘n’ Quiet Driver

Installs the AMD Cool ‘n’ Quiet™ technology driver.

AMD Chipset Program Driver

Installs the AMD

chipset drivers for the AMD 790FX chipset.

SoundMAX ADI Audio Driver

Installs the SoundMAX

ADI audio driver and application.

Marvell Yukon Gigabit Ethernet Driver

Installs the Marvell

Yukon Gigabit Ethernet driver.

Marvell 61xx SATA RAID Controller Driver

Installs the Marvell

Serial ATA RAID controller driver to support external SATA

devices(s) with PM (Port Multiplier) function.

USB 2.0 Driver

Installs the Universal Serial Bus 2.0 (USB 2.0) driver.

Summary of Contents for M3A79-T Deluxe - Motherboard - ATX





































































































































































Search results

Summary of Contents for M3A79-T Deluxe - Motherboard - ATX

Reviews:

Asus M3A79-T Deluxe - Motherboard - ATX, User Manual, Page: 112 / 164

Search results

Summary of Contents for M3A79-T Deluxe - Motherboard - ATX

Reviews: