manualshive.com logo in svg

Asus M3A79-T Deluxe - Motherboard - ATX, User Manual, Page: 158 / 164

Share
Download
Asus M3A79-T Deluxe - Motherboard - ATX User Manual Download Page 158

4-48

Chapter 4: Software support

The Main Menu above allows you to select an operation to perform. The Main 

Menu options include:
• 

View Drive Assignments:

 shows the status of the hard disk drives.

•  Define LD:

 creates a RAID 0, RAID 1, RAID 5 or RAID 10 configuration. 

• 

Delete LD:

 deletes a selected RAID set and partition.

•  Controller Configuration:

 Shows the system resources configuration.

Press <1>, <2>, <3>, or <4> to enter the option you need; press <ESC> to exit the 

utility. 

  

FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc. 

View Drive Assignments........[1]

Define LD.....................[2] 

 

Delete LD.....................[3] 

 

Controller Configuration......[4] 

[ Main Menu ]

Press 1..4 to Select Option 

 

 

 

[ESC] Exit 

[ Keys Available ]

AMD

®

 FastBuild™ Utility

To enter the AMD

®

 FastBuild™ utility: 

1.   Boot up your computer.
2.  Press <Ctrl+F> during POST to display the main menu of the utility.

Summary of Contents for M3A79-T Deluxe - Motherboard - ATX





































































































































































Reviews:

No comments