Asus M3A79-T Deluxe - Motherboard - ATX User Manual Download Page 58

Page: 58 / 164

2-32

Chapter 2: Hardware information

12. Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that

supports either HD Audio or legacy AC`97 audio standard. Connect one end

of the front panel audio I/O module cable to this connector.

•

We recommend that you connect a high-definition front panel audio

module to this connector to avail of the motherboard’s high-definition audio

capability.

•

If you want to connect a high-definition front panel audio module to this

connector, set the

Front Panel Support Type

item in the BIOS setup to

[HD Audio];

if you want to connect an AC'97 front panel audio module to

this connector, set the item to

[AC97]

. By default, this connector is set to

[HD Audio]

Summary of Contents for M3A79-T Deluxe - Motherboard - ATX





































































































































































Search results

Summary of Contents for M3A79-T Deluxe - Motherboard - ATX

Reviews:

Asus M3A79-T Deluxe - Motherboard - ATX, User Manual, Page: 58 / 164

Search results

Summary of Contents for M3A79-T Deluxe - Motherboard - ATX

Reviews: