manualshive.com logo in svg

Asus M3A79-T Deluxe - Motherboard - ATX, User Manual, Page: 146 / 164

Share
Download
Asus M3A79-T Deluxe - Motherboard - ATX User Manual Download Page 146

4-36

Chapter 4: Software support

4.3.11  ASUS Express Gate

ASUS Express Gate is an instant-on environment that gives you quick access to 

the Internet. Within a few seconds of powering on your computer, you will be at the 

Express Gate menu where you can start the web browser, Skype, or other Express 

Gate softwares.

Installing ASUS Express Gate

•  ASUS Express Gate supports installation on SATA HDDs in 

IDE mode

 only.

•  ASUS Express Gate supports HDDs or ODDs connected to 

motherboard 

chipset-controlled onboard SATA ports

 only. All onboard extended SATA 

ports and external SATA ports are NOT supported. See chapter 2 for the 

exact location of onboard SATA ports.

•  ASUS Express Gate supports installation on USB HDDs and Flash drives, 

but the software performance may be slower than installed on SATA HDDs.

To install Express Gate on your computer
1.  Place the support CD/DVD to the optical drive. The 

Drivers

 installation tab 

appears if your computer has enabled Autorun feature.

2.  Click the 

Utilities

 tab, then click 

ASUS Express Gate Installer

.

3.  Select the language for installation 

and click 

OK

.

4.  The InstallShield Wizard for 

Express Gate appears. Click 

Next

 

to continue.

Summary of Contents for M3A79-T Deluxe - Motherboard - ATX





































































































































































Reviews:

No comments