Asus M2N32 WS Professional User Manual Download

Page: 53 / 130

ASUS

M2N32 WS Professional

2-2

2.7

Connectors

2.7.1

Rear panel connectors

1. PS/2 mouse port (green).

This port is for a PS/2 mouse.

2. Parallel port.

This 25-pin port connects a parallel printer, a scanner, or other

devices.

3. LAN 1 (RJ-45) port.

Supported by Marvell

88E1116 Gigabit LAN controller,

this port allows Gigabit connection to a Local Area Network (LAN) through a

network hub. Refer to the table below for the LAN port LED indications.

4. LAN 2 (RJ-45) port.

Supported by the Marvell

88E1116 Gigabit LAN

controller, this port allows Gigabit connection to a Local Area Network

(LAN) through a network hub. Refer to the table below for the LAN port LED

indications.

7 8

5. Rear Speaker Out port (black).

This port connects the rear speakers in a

4-channel, 6-channel, or 8-channel audio configuration.

6. Center/Subwoofer port (orange).

This port connects the center/subwoofer

speakers.

7. Line In port (light blue).

This port connects the tape, CD, DVD player, or

other audio sources.

8. Line Out port (lime).

This port connects a headphone or a speaker. In

4-channel, 6-channel, and 8-channel configuration, the function of this port

becomes Front Speaker Out.

Activity/Link Speed LED
Status

Description Status

Description

OFF

No link

OFF

10 Mbps connection

ORANGE

Linked

ORANGE

100 Mbps connection

BLINKING

Data activity

GREEN

1 Gbps connection

LAN port LED indications

SPEED

LED

ACT/LINK

LED

LAN port

Summary of Contents for M2N32 WS Professional



































































































































Search results

Summary of Contents for M2N32 WS Professional

Reviews:

Related manuals for M2N32 WS Professional

Brands by name

Popular brands

Asus M2N32 WS Professional, User Manual

Search results

Summary of Contents for M2N32 WS Professional

Reviews:

Related manuals for M2N32 WS Professional

Brands by name

Popular brands