Asus M2N32 WS Professional User Manual Download

Page: 81 / 130

ASUS M2N32 WS Professional

4-9

4.1.6

ASUS CrashFree BIOS 3 utility

The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore

the BIOS file when it fails or gets corrupted during the updating process. You can

update a corrupted BIOS file using the motherboard support CD or the floppy disk

that contains the updated BIOS file.

Prepare the motherboard support CD or the floppy disk containing the updated

motherboard BIOS before using this utility.

Recovering the BIOS from the support CD

To recover the BIOS from the support CD:
1.  Turn on the system.
2.  Insert the motherboard support CD to the optical drive.
3.  The utility displays the following message and automatically checks the CD

for the BIOS file.

4. Restart the system after the utility completes the updating process.

• Only the USB flash disk with FAT 32/16/12 format and single partition can

support ASUS CrashFree BIOS 3. The device size should be smaller than

8GB.

• DO NOT shut down or reset the system while updating the BIOS! Doing so

can cause system boot failure!

Award BootBlock BIOS v1.0
Copyright (c) 2000, Award Software, Inc.

BIOS ROM checksum error
Detecting IDE ATAPI device...
Found CDROM, try to Boot from it... Pass

When found, the utility reads the BIOS file and starts flashing the corrupted

BIOS file.

Award BootBlock BIOS v1.0
Copyright (c) 2000, Award Software, Inc.

BIOS ROM checksum error
Detecting IDE ATAPI device...

Recovering the BIOS from the USB flash disk

To recover the BIOS from the USB flash disk:
1. Insert the USB flash disk that contains BIOS file to the USB port.

2. Turn on the system.

3. The utility will automatically checks the devices for the BIOS file When found,

the utility reads the BIOS file and starts flashing the corrupted BIOS file.

4. Restart the system after the utility completes the updating process.

Summary of Contents for M2N32 WS Professional



































































































































Search results

Summary of Contents for M2N32 WS Professional

Reviews:

Related manuals for M2N32 WS Professional

Brands by name

Popular brands

Asus M2N32 WS Professional, User Manual

Search results

Summary of Contents for M2N32 WS Professional

Reviews:

Related manuals for M2N32 WS Professional

Brands by name

Popular brands