Asus KCMA-D8 User Manual Download Page 137

Page: 137 / 152

ASUS KCMA-D8

6-15

6.2

AMD

processor driver installation

This section provides instructions on how to install the AMD

processor driver on

the system.
You need to manually install the AMD

processor driver on a Windows XP / Server

2003 operating system.
To install the AMD

processor driver:

1. Restart the computer, then log on with

Administrator

privileges.

2. Insert the motherboard/system support DVD to the optical drive. The support

DVD automatically displays the

Drivers

menu if Autorun is enabled in your

computer.

If Autorun is NOT enabled in your computer, browse the contents of the support

DVD to locate the file

AUTORUN.EXE

and double-click the

AUTORUN.EXE

run the support DVD.

3. Click the item

AMD Processor Driver

from the menu, and then follow the

onscreen instructions to complete the installation.

Summary of Contents for KCMA-D8

























































































































































Search results

Summary of Contents for KCMA-D8

Reviews:

Related manuals for KCMA-D8

Brands by name

Popular brands

Asus KCMA-D8, User Manual

Search results

Summary of Contents for KCMA-D8

Reviews:

Related manuals for KCMA-D8

Brands by name

Popular brands