61
GigaX2024/2048 L2 Managed Switch User Manual
CLI command:
l2 stp bridge set
Hello Time (1..10 seconds): [old Hello Time] <new Hello Time>
Forward Delay (4..30 seconds): [old Forward Delay] <new Forward Delay>
Max Age (6..40 seconds): [old Max Age] <new Max Age>
Bridge Priority (0..61440): [old Bridge Priority] <new Bridge Priority>
[Priority]
[Path Cost]
[Edge Port]
[Point-to-point]
Displays the current STP/RSTP ports parameters setting.
CLI command:
l2 stp port set
Port Settings (all,...): [all] <select a port number, or just type ʻallʼ to iteratively
config>
Port <port number> Priority (0..240): [old port Priority] <new port Priority>
Port <port number> Path Cost (1..200000000): [old port Path Cost] <new
port Path Cost>
Port <port number> EdgePort (yes/no): [old port EdgePort] <new port
EdgePort >
Port <port number> Point-to-Point (yes/no/auto): [old port Point-to-Point]
<new port Point-to-Point >
[Reload]
Restores the previous saved settings from configuration file.
CLI command:
l2 stp retrieve
CLI command:
l2 stp bridge retrieve
CLI command:
l2 stp port retrieve
[Show Trunk]
Displays a specific trunk group settings. User can create a new trunk group by
specify a unique trunk ID, a trunk name description, the port selection criterion
(rtag), LACP mode (enabled or disable), and its trunk group member ports.
CLI command:
l2 trunk show <trunk id>
