26
GigaX2024/2048 L2 Managed Switch User Manual
the limit value. Traffic control does not work for isolated port of Private VLAN.
Click
OK
to make the setting send to the switch (HTTP server). Click
Reload
to
refresh the settings to current value. To make the configuration effective, please
go to
Save Configuration
page, then click
Save
.
Figure 30. Traffic Control
4.5.7 Dynamic Addresses
This page displays the result of dynamic MAC address lookup by port, VLAN ID,
or specified MAC address. The dynamic address is the MAC address learned
by switch, it will age out from the address table if the address is not learned
again during the age time. User can set the age time by entering a valid number
from 10 to 1,000,000 in seconds. Then click
OK
to make the setting effective
immediately. Click
Reload
to refresh the settings to current value. To save
configuration permanently, please go to
Save Configuration
page, then click on
Save
.
You can look up MAC addresses by checking the port, VLAN ID, or/and MAC
address, then click on the
Query
. The address window will display the result of
the query.
Figure 31. Dynamic Address
