20
GigaX2024/2048 L2 Managed Switch User Manual
Select the corresponding port and configure the port setting, then click on the
Modify
button. The field you change will update the content of the display
window. Click
OK
to send the settings to the switch (HTTP server). Click
Reload
to refresh the setting to current value. To make the configuration effective, go to
Save Configuration
page, then click on
Save
.
Figure 21. Physical Interface
4.5 Bridge
The Bridge page group contains layer 2 configurations, like link aggregation,
STP....etc..
4.5.1 Spanning Tree
The Spanning Tree page activates the configuration while the switch is working.
The page consists of three parts.
The first part shows the root information. It shows the current STP setting about
the root switch.
The second part is STP setting. The following options are available:
Disable/STP Enable/RSTP Enabled:
Turn the STP/RSTP off/on. When you
turn the STP/RSTP on, STP/RSTP will use the following settings if the switch
is the root switch.
Hello Time:
the interval between the generation of configuration BPDU
Max Age:
a timeout value to be used by all Bridges in the LAN
Forward Delay:
a timeout value to be used by all bridges in the LAN
Bridge Priority:
the switch priority in the LAN
The third part is port setting. It contains a display window to show the current
configuration for each port. Click
Modify
to change the port setting for STP/
RSTP. The following fields are available:
Port:
select the corresponding port to configure
