40
GigaX Series L2 Smart Plus Switch User Manual
[Port Excessive Collisions Drop]
Enable or disable drop of frames when excessive collisions occur in half duplex
mode.
[enable|disable]: Enable/disable frame drop (default: Show Excessive
Collisions Drop mode)..
CLI command : Port Excessive Collisions Drop [enable|disable]
[VeriPHY]
Perform VeriPHY cable diagnostics on the specified port(s).
[<portlist>]: Port list (Default: All ports).
[full|anomaly|termination]: Type of diagnostics. Full comprises cable
length and full anomaly check, anomaly comprises full anomaly check and
termination comprises anomaly check without check for coupling between
pairs. (default: full).
CLI command : VeriPHY [<portlist>] [full|anomaly|termination]
5.2.4 MAC Commands
[MAC Configuration]
Show the permanently stored MAC table and the MAC ageing timer.
CLI command : MAC Configuration
[MAC Add]
Add permanent MAC address and VLAN ID on ports.
<macaddress>: MAC address, 12 digit hex string, optionally separated with
dashes or colons (e.g. 010203ABCDEF or 01-02-03-AB-CD-EF or 01:02:03:
AB:CD:EF).
<portlist> : Port list. Use “none” to specify no ports.
[<vid>] : VLAN ID, 1-4095 (default: 1).
CLI command : MAC Add <macaddress> <portlist>|none [<vid>]
[MAC Delete]
Delete MAC address and VLAN ID.
<macaddress>: MAC address, 12 digit hex string, optionally separated with
dashes or colons (e.g. 010203ABCDEF or 01-02-03-AB-CD-EF or 01:02:03:
AB:CD:EF).
