13
GigaX Series L2 Smart Plus Switch User Manual
Table 5. Commonly used buttons and icons
Button/Icon Function
Stores any changes you have made on the current page.
Re-displays the current page with updated statistics or settings.
Adds the existing configuration to the system, e.g. portBased
VLAN, 802.1Q VLAN, MAC address ,etc.
Modifies an existing entry
Deletes the selected item, e.g. a VLAN, MAC address, etc.
Re-displays the current page with updated statistics or settings.
4.3
Configuration Pages
Configuration pages include System, Ports, PortBased VLANs, 802.1Q VLANs,
Advanced 802.1Q VLANs, Mirror, MACs, Aggregation, RSTP, 802.1X, Quality of
Service, Filter, Rate limit.
4.3.1 System
The System page contains the following information:
• IP Address: Setup or show IP configuration.
• Subnet Mask: Setup or show Subnet Mask.
• Gateway: Setup or show Gateway.
• Management VLAN: Setup or show Management VLAN(1-4095).
• Name: Setup or show system name.
• Password: Setup password. The empty string ("") disables the password
check. Only perform a factory default can set password blank.
• Inactivity Timeout (secs): Set or show the console inactivity timeout in
seconds. The range is 60-10000. The value zero disables timeout.
• SNMP enable: Check box for enable. Default Read Community name is
"public" and Write (Set) community name must be the same as the system
password.
• SNMP trap destination: Set or show the IP address SNMP trap sent to.
Click on the
Apply
button to make the configuration effective, or the
Refresh
button to refresh the setting to current value. as shown in Figure 11.