GigaX Series L2 Managed Switch User Guide
75
Port <port number> Priority (0..255):[old port Priority]
<new port Priority>
Port <port number> Path Cost (1..65535):[old port Path Cost]
<new port
Path Cost>
Port <port number> EdgePort (yes/no):[old port EdgePort]
<new port
EdgePort >
Port <port number> Point-to-Point (yes/no/auto):[old port Point-to-Point]
<new port Point-to-Point >
[Reload]
Restores the previous saved settings from configuration file.
CLI command :
l2 stp retrieve
CLI command :
l2 stp bridge retrieve
CLI command :
l2 stp port retrieve
[Show Trunk]
Displays a specific trunk group settings. User can create a new trunk group by
specify a unique trunk ID, a trunk name description, the port selection criterion
(rtag), LACP mode (enabled or disable), and its trunk group member ports.
CLI command :
l2 trunk show
<trunk id>
[rtag]
Sets traffic distribution algorithm (1~3). The “rtag” is the packet distribution
algorithm for the trunk group.
CLI command :
l2 trunk rtag
<1|2|3>
Rtag values and corresponding meanings:
1: source XOR destination MAC(L2),
2: source XOR destination IP(L3)
3. source XOR destination Port(L4).
Summary of Contents for GigaX 2124X
