GigaX Series L2 Managed Switch User Guide
83
Allows user to delete a community entry from community table.
CLI command :
snmp community delete
Community entry (table index):
<entry id to delete>
This action will delete all hosts in community string with '
delete
community
'.
Are you sure? (y/n):[y] <y for ‘yes’; n for ‘no’>
[Reload]
Restores the previous saved settings from configuration file.
CLI command :
snmp community retrieve
[Host IP Address]
[Community]
A host entry contains a host IP address, network mask and its dedicated
community string.
CLI command :
snmp host add
Host IP/Subnet:
<
IP address
>
Netmask:
<
netmask
>
Community:
<
community string
>
User can modify a host entry in the table by reassigning its allowed IP address,
network mask and community string.
CLI command :
snmp host set
Host table entry (table index):
<entry id to config>
Host IP/Subnet (old IP address):
<new IP address>
Netmask (old netmask):
<new netmask>
Community (old community string):
<new community string>
Allows user to delete a host entry from host table.
Summary of Contents for GigaX 2124X
