GigaX Series L2 Managed Switch User’s Guide
68
5.1.1
Boot ROM Command Mode
During the POST process, you can enter a “
Boot ROM Command
” mode by
pressing <ENTER> key as shown in Figure 43.
Figure 43 shows dual images in the switch. One firmware is in Slot 0 and the
other firmware is in Slot 1. The later version will be selected to boot the system
automatically.
Enter the “?” key to show the help messages for all available commands.
Although the commands are helpful in some situation, we
STRONGLY suggest users not to use them if you don’t
know the command function.
Figure 43. Boot ROM Command Mode
Summary of Contents for GigaX 2124X
