manualshive.com logo in svg

Asus ESC8000 G4 Series, User Manual, Page: 55 / 192

Share
Download
Asus ESC8000 G4 Series User Manual Download Page 55

2-33

ASUS ESC8000 G4 Series

2.7 

Removable/optional components

You may need to remove previously installed system components when installing or removing 

system devices. You may need to install the optional components into the system. This 

section tells how to remove/install the following components:

1. 

GPU fans

2. 

Redundant power supply units

Ensure that the system is turned off before removing any components. 

2.7.1 

GPU fans

To uninstall the GPU fans:

1. 

Press the latch inwards (A) to release the 

GPU fan, then lift the fan from the fan cage 

(B).

2. 

Set the fan aside.

3. 

Repeat steps 1 to 2 to uninstall the other 

GPU fans.

To reinstall the GPU fans, insert the fan into the 

fan cage. Ensure the fan connector is seated 

firmly within the cable holder.

Summary of Contents for ESC8000 G4 Series

































































































































































































Reviews:

No comments