Asus ESC8000 G4 Series User Manual Download Page 158

Page: 158 / 192

6-12

Chapter 6: RAID Configuration

6.3

Intel

Rapid Storage Technology enterprise

(Windows)

The Intel

Rapid Storage Technology enterprise allows you to create RAID 0, RAID 1, RAID

10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to the

Serial ATA connectors supported by the Southbridge.

You can click

Rescan

to re-scan any attached hard disks.

Turn on the system and go to the windows desktop.

Click the

Intel

Rapid Storage Technology enterprise

icon to display the main menu.

Your storage system is configured for data protection, increased performance and

optimal data storage capacity. You can create additional volumes to further optimize

your storage system.

To enter the Intel

Rapid Storage Technology enterprise utility under Windows operating

system:

You need to manually install the Intel

Rapid Storage Technology enterprise utility on a

Windows

operating system. Please refer to the installation instructions in Chapter 7.

Summary of Contents for ESC8000 G4 Series

































































































































































































Search results

Summary of Contents for ESC8000 G4 Series

Reviews:

Asus ESC8000 G4 Series, User Manual, Page: 158 / 192

Search results

Summary of Contents for ESC8000 G4 Series

Reviews: