Asus ESC8000 G4 Series User Manual Download Page 135

Page: 135 / 192

5-37

ASUS ESC8000 G4 Series

Rank Interleaving [Auto]

Select different rank interleaving setting.

Configuration options: [Auto] [1-way Interleave] [2-way Interleave]

[4-way Interleave] [8-way Interleave]

Memory RAS Configuration

Mirror Mode [Disabled]

Allows you to select Mirror Modes. Mirror Mode will set entire 1LM/2LM memory in

system to be mirrored, consequently reducing the memory capacity by half. Enabling

Mirror Mode will disable XPT Prefetch.

Configuration options: [Disabled] [Mirror Mode 1LM] [Mirror Mode 2LM]

UEFI ARM Mirror [Disabled]

Allows you to enable or disable UEFI ARM Mirror.

Configuration options: [Disabled] [Enabled]

Memory Rank Sparing [Disabled]

Allows you to enable or disable Memory Rank Sparing

Configuration options: [Disabled] [Enabled]

Patrol Scrub [Enabled]

Allows you to enable or disable Patrol Scrub.

Configuration options: [Disabled] [Enabled]

NGN Configuration

Average Power Budget (in mW) [18000]

Allows you to set the power management policy for average power in 250 mW

increments.

Configuration options: [10000] - [18000]

Summary of Contents for ESC8000 G4 Series

































































































































































































Search results

Summary of Contents for ESC8000 G4 Series

Reviews:

Asus ESC8000 G4 Series, User Manual, Page: 135 / 192

Search results

Summary of Contents for ESC8000 G4 Series

Reviews: