manualshive.com logo in svg

Asus ESC8000 G4 Series, User Manual, Page: 144 / 192

Share
Download
Asus ESC8000 G4 Series User Manual Download Page 144

5-46

Chapter 5: BIOS Setup

5.12 

Boot menu

The Boot menu items allow you to change the system boot options.

Bootup NumLock State [On]

Allows you to select the power-on state for the NumLock.

 

Configuration options: [Off] [On]

Boot Logo Display [Disabled]

Allows you to enable or disable the full screen logo display feature. 

Configuration options: [Auto] [Full Screen] [Disabled]

The following item appears only when you set the 

Boot Logo Display

 to 

[Disabled]

.

POST Report [5 sec]

Allows you to set the desired POST Report waiting time from 1 to 10 seconds.

Configuration options: [1 sec] ~ [10 sec] [Until Press ESC]

Boot Option Priorities

These items specify the boot device priority sequence from the available devices. The 

number of device items that appears on the screen depends on the number of devices 

installed in the system.

• 

To select the boot device during system startup, press <F8> when ASUS Logo 

appears.

• 

To access Windows OS in Safe Mode, please press <F8> after POST.

Hard Drive / CD/DVD ROM / Floppy Drive / BBS Priorities

These items appear only when you connect SATA ODD or hard drive to the SATA ports and 

allow you to set the booting order of the SATA devices.

Summary of Contents for ESC8000 G4 Series

































































































































































































Reviews:

No comments