“Statistics” menu
Operating manual U 158 -
Version 10-2018A
page 54
“Statistics” menu
To have data transmission statistics for the U 118 displayed, click on the “Statistics” item in the menu
at the left. All statistics relevant to the operation of the device and which can be used for analysis are
displayed here. The following individual tables are displayed:
Ethernet bandwidth
Figure 63: Ethernet bandwidth
The transmission rates for sending (transmit) and reception (receive) are specified for the respective
interfaces Management A, Management B, Data A and Data B.
Ethernet frames
Figure 64: Ethernet frames
The following parameters are displayed for the interfaces Data A and Data B, in this order:
The number of IP frames transmitted to the processor is specified in the first three lines of the
table.
Number of defective frames.
Number of frames which could not be allocated.
Number of frames which could not be allocated due to exceeding the total buffer depth.
The number of frames transmitted per transport stream in total or per second is displayed in lines
7 to 10 for each IP transmitter.
The number of frames forwarded to the IP receiver (primary, secondary and tertiary respectively)
are displayed in the last line.
