manualshive.com logo in svg

ASTRO U 144, Operating Manual

Share
Download
ASTRO U 144 Operating Manual Download Page 48

“Update/config.” menu

Oerating manual U 144 - 

Version 08-2016A

page 48 

“Update/config.” menu

The menu item “Update/config.” allows you to update the firmware version of your device and upload 
and download a variety of configuration data.

Firmware update from a local memory location

You will require an update archive for updating the device firmware. This can be downloaded from the 
ASTRO firmware server (address: “http://astro-firmware.de/Headend-Firmware/u1xx”). The file name 
of the archive required ends in “.up”. The name is comprised of the type designation of the device (U 
168) and a four-digit version number.
Once the update archive has been downloaded, start by selecting the item “Update/config.” in the user 
interface menu. The “Software update” table then appears in the content area at the top. 

Figure 51: Firmware update

Now click on the “Search” button and select the path to the memory location of the update archive 
downloaded beforehand. 
Then click on the “Update and Reboot” button to start the update process. Please wait for the process 
to be completed, and for the device to reboot.

Available Update Archives

The table table „Available Update Archives“ shows an overview update-archives already stored in the 
module (up to ten). Users can have access to older software versions (Installation or deleting). 

Figure 52: Firmware Update

Uploading and downloading configuration files

Figure 53: Loading/saving configuration files

Configuration files can be uploaded and downloaded.
To upload files, use the “Search” button to select the preferred file. 
Then click on the “Upload” button to start the uploading process.

Summary of Contents for U 144





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands