30
5. Site Tab - Site Information
Be sure that it agrees with AP V2 Driver. Updating one does not update the other.
a) Click Manage Sites button.
b) Create a Named Site.
c) Enter Latitude and Longitude.
d)
Click Time Offset button (at right).
e) Enter Elevation, Temp (approximate) and
default Pressure.
6. Connection
(reference the Help file by clicking
the “?” in the top right corner) Additional information can be found by going to the
site and selecting APCC Current Version. There you'll find the up-to-date copy of APCC Installation and Getting Started
Quick Guide - PDF Documentation.
The most robust and recommended methods of connection are Ethernet
and Serial. These will also allow greater computer-to-mount connectivity
distance (up to 100’ or more).
The GTOCP5 uses an industrialized and self-powered USB connector and
its robustness will only be limited by the USB of your computer (the weak
link). Avoid using USB hubs which can reduce reliability. If you must use a
hub, then buy a high-quality, powered hub.
a)
Create Virtual Ports first - Checked.
b)
Auto-Config - Checked.
c) Auto-Connect - these are a personal choice (generally checked).
