Astrid UPS HALLEY/E Series Product Manual Download Page 2

Page: 2 / 56

Rev.

Descrizione
Description

Data
Date

Emesso

Issued

Controllato

Checked

Approvato

Approved

Lingua
Language

Pagina
Page

di Pag.
of Pag.

First issue

01/02/06

G. Senesi

V. Gremoli

E 1 55

General revision

05/05/08

G. Senesi

V. Gremoli

Added battery fuse box informations

02/12/09 E.Biancucci

Berti V.

Gremoli

Codice / Code

OM226142

English

PRODUCT

MANUAL

UNINTERRUPTIBLE POWER SUPPLIES

•

HALLEY/E 20kVA (3Ph / 3Ph)

•

HALLEY/E 30kVA (3Ph / 3Ph)

•

HALLEY/E 40kVA (3Ph / 3Ph)

•

HALLEY/E 60kVA (3Ph / 3Ph)

•

HALLEY/E 80kVA (3Ph / 3Ph)

The present manual is an integrant part of the products technical back-up documentation. Read the warnings with

attention as they give important instructions concerning safety.

This equipment must be used only for its appointed operation. Any other use is to be considered incorrect and

therefore dangerous. The manufacturer cannot be held responsible for damages caused by incorrect, wrong and
unreasonable use.

Astrid Energy Enterprises holds itself responsible only for the equipment in its original configuration.

Any intervention altering the structure or the operating cycle of the equipment has to be carried out and authorized

directly by Astrid Energy Enterprises.

Astrid Energy Enterprises cannot be held responsible of the consequences deriving from the use of non original spare

parts.

Astrid Energy Enterprises reserves its right to carry out technical modifications on the present manual and equipment

without giving any notice. If any typing errors or mistakes are detected they will be corrected in the new versions of the
manual.

Astrid Energy Enterprises holds itself responsible for the information given in the original version of the manual in

Italian language.

Right of ownership – copying prohibited. Astrid Energy Enterprises protects its rights on the drawings and catalogues

by law.

Astrid Energy Enterprises S.p.A.

Viale Europa, 22 – Loc. Ponte d’Arno

52018 Castel San Niccolò (AR)

Tel. +39 0575 509701 – Fax +39 0575 500032

Web site: www.astridups.it – e-mail: [email protected]

Summary of Contents for UPS HALLEY/E Series

























































Search results

Summary of Contents for UPS HALLEY/E Series

Reviews:

Related manuals for UPS HALLEY/E Series

Brands by name

Popular brands

Astrid UPS HALLEY/E Series, Product Manual

Search results

Summary of Contents for UPS HALLEY/E Series

Reviews:

Related manuals for UPS HALLEY/E Series

Brands by name

Popular brands