23
viron xt series 2 pumps
Installation Manual
22
viron xt series 2 pumps
Installation Manual
7.3
Maintenance Schedule
The Viron XT Series 2 Pump incorporates moving
parts and withstands high velocity water with
chemicals in it. Some of these parts will wear in the
normal course of use and require regular checks
and maintenance.Performing these checks and
maintenance will identify parts that have worn and
require repair/replacement before further serious
damage is sustained. A small amount of regular care
and attention to your pool equipment will help ensure
long life and trouble free performance.
To protect against extremes of temperature, your
unit is vented to allow expensive electronics to cool.
Ants and some insects are often attracted to the
warmer, dry environment inside the enclosure. We
recommend that, with power turned off, you spray a
surface insecticide on the surfaces surrounding the
control to prevent ant and insect ingress. Repeat
every three months or as necessary.
Note:
Regular maintenance is important to ensure long
life and trouble free performance of your pool
equipment. If unable to perform the maintenance
yourself, contact your local pool professional to
request assistance with the maintenance.
Timing
Maintenance Check
Service Action If Required
Weekly or sooner
Check and empty hair and lint basket
Empty leaves and debris
Three Monthly
Check Lid O-ring and Inlet/Outlet O-rings
for leaks
Isolate Pump, turn power off, clean and grease O rings or
replace if necessary
Check surroundings for leaves, debris
and flooding
Remove debris and rectify if flooding
Three Monthly
Check for insects/ants
Spray a surface insecticide on the surfaces around the
unit to prevent ant and insect ingress
Three Monthly
Check for leaks under the pump
Call Service technician, repair or replace mechanical seal
and motor bearing if necessary
Table 2. XT Series 2 Pump Maintenance Schedule
