13
Lockwood SMARTair
™
Portable Programmer
assaabloy.co.nz
Keyboard Test
Clicking the tick key starts the keyboard test. The Portable Programmer will ask the user to press all the keys of the keyboard one by one, to check
that they work properly.
The final key to be tested is the Power button. After this button has tested successfully, a Keyboard test ‘OK’ message will be displayed.
Clock Test
The Portable Programmer checks its built-in clock. If the result of the test is satisfactory, the following message will be displayed;
Key Test
This portion of the test is not used as we’re utilising Proximity Credentials.
Test of Key Connector
This portion of the test is not used as we’re utilising Proximity Credentials.
Key Test
Pressing F1 will advance to the next
screen asking for F2 to be pressed.
This continues until all keys have been tested
To carry out the “Memory Test” the Portable Programmer needs to delete
all data stored in its memory. Before performing this function, the Portable
Programmer will for conformation of this operation.
