14
Lockwood SMARTair
™
Portable Programmer
assaabloy.co.nz
Clicking the cross button will cancel the operation and finish the test of the Portable Programmer.
Clicking the tick key, the Portable Programmer will delete all stored data and it will start the Memory Test.
Pressing “OK” will complete the test of the Portable Programmer. If the Portable Programmer has not detected any faults, the following message
will be displayed.
If the Portable Programmer has detected a fault in any of the tests carried out, it will display details of the failed test with either of these categories
- keyboard, clock, key, cable with the key or memory. If this occurs, perform another complete test as per the previous steps and if the fault is
detected again, contact your supplier.
