14
Access 600 M802
Installation Instructions
FE6600/BL6600/MP6600 Series Multi-point Lock
FM452 07/20
Copyright © 2017, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
7
Installation Instructions, continued
g
Install Inside Gasket (if necessary)
h
Connect Earth Ground
Remember to install inside gasket when
lock is being used in an outdoor application
a. Gasket fits snug around plate at top and sides,
leaving room for the hole at the bottom.
b. Remove (peel) backing and place gasket
on door.
Required for exterior
door applications.
Inside of Door
Connect pin 5 green/yellow ground wire ring terminal to top right screw.
(2) #8-32 x 2”
Phillips Flat Head
Machine Screw
