Assa 1125 Panikutrymningsbeslag
ASSA 179A S4 Emergency exit device
Stop washer
7
Thumbturn follower
Additional spring
ASSA AB 090890
Edition 3
4/7
A
For 53 mm and 63 mm
thumbturn followers an
additional spring ought
to be used. They should be
mounted with the concentric
ends facing each other.
A
Mount the thumbturn
follower with the stop
washer facing the
lock case [ ].
Thread the spring [ ]
onto the follower with
the concentric end
pointing
away
from the
lock case.
1
2
5
6
Right hand device
1
Left hand device
2
1
2
A
1
2
Thread the stop washer onto the thumbturn
follower with the flat taper pointing downwards. For
right hand devices [ ] the taper should point to
the left and for left hand devices [ ] to the right.
NOTE!
If the B- or C-mesure-
ment of the door is less than
22 mm the 3 mm distance
plate ASSA 357932 shall be
used. Not included.
B / C - measure
≥22 mm
≥32 mm
43 mm
53 mm
Square
pin length
≥42 mm
63 mm
