Assa 1125 Panikutrymningsbeslag
ASSA 179A S4 Emergency exit device
Function check
9
Handle
Exit label & Seal strip
10
ASSA AB 090890
Edition 3
5/7
8
NOTE!
NOTE!
Only seal strip recommended
by ASSA is allowed.
A
Test the function
by pressing the
exit handle
downwards.
Dead bolt/latch/
latches shall
then retract and
the door shall be
possible to open.
After opening
procedure the
exit handle
shall easily
return to its
starting position.
Attach enclosed
after glowing
exit label on the
exit handle, the
arrow on the
label shall point
in the maneuve-
ring direction
Attach the plastic seal strip
A
B
B
Ensure that the
nipples are mounted
on the outside
If the B- or
C-mesurement of
the door is less than
22 mm the 3 mm
distance plate ASSA
357932 shall be
used. Not Included.
Mount the device [ ],
the attachment plate
[ ] for theseal strip
and the lever handle
follower [ ] with four
M5 screws.
A
1
2
3
NOTE!
For right hand devices the exit handle
is mounted in angle 11 o’clock and for left
hand devices in angle 1 o’clock.
