6
E N G L I S H
ASPIRCOMFORT PRO X 380V
ALL IN ONE
Complete unit capable of exchanging air and integrating the cooling thermal demands of the served rooms. The
unit is complete with all components for its operation and ready to use.
UVC lamp (ACCESSORY AP20384) AND VOC SENSOR
The unit is equipped with a UVC lamp (AP20384 accessory), which enables a germicidal action to be carried out
on the air introduced from outside through the effect of UVC; the lamp is activated automatically according to the
quality of the room air.
VENTILATION
Fans with directly coupled brushless motor; the fans operate in various modes controlled mainly by the air quality
sensor located inside the unit.
ACTIVE THERMODYNAMIC RECOVERY
The unit allows active recovery of energy from the exhaust air. The thermodynamic recovery allows, thanks to its
cooling circuit, to supply energy to the environment in a higher quantity than that taken away by the ventilation for
90% of the unit's operation.
FILTRATION
There are 2 ePM1 filters on the extract air and the supply air; the filter on the supply air is placed after the coil to
completely filter out any impurities in the supply air, On the outdoor air there is a Coarse pre-filter that protects
the cleanliness of the unit.
STRUCTURE
Self-supporting sheet metal frame.
Self-supporting sheet metal structure, externally painted (in the visible versions), with polyethylene and EPDM
thermal and acoustic insulation in between.
COOLING CIRCUIT
Built with braze welded copper, complete with: High efficiency BLDC compressor, filter dryer, finned coils,
electronic expansion valve, reversing valve and safety devices.
ADJUSTMENT
Electric panel on-board the unit with microprocessor and dedicated regulation. Fan management, temperature
display and setpoint, timed dirty filter management. Management of defrosting algorithm optimised for
operation at low external temperatures; Panel with graphic interface
on board the machine and remote
control included in the visible versions.
