24
E N G L I S H
ASPIRCOMFORT PRO X 380V
VENTILATION-ONLY FUNCTION
When this function is activated, the compressor is never switched on and the appliance has no
effect on either the temperature or the humidity of the air in the room. It is possible to select
the fan speed.
NIGHT WELLNESS FUNCTION
With the appliance switched on and the cooling or heating mode selected, pressing the button
allows multiple functions to be performed to maximise the quietness of the appliance, save
electricity and regulate night wellness.
In this mode, fan operation is set to minimum speed.
This function should be activated immediately before falling asleep.
• In cooling mode, the set temperature set is increased by 1 °C after one hour and by a further
1 °C after 2 hours. After the second hour, the temperature set is not altered any further and
after a further 6 hours the appliance is placed in stand-by.
• In heating mode, the set temperature is reduced by 1 °C after one hour and by a further 1
°C after 2 hours.
After the second hour, the temperature set is not altered any further and after a further 6
hours the appliance is placed in stand-by.
This function is not available for dehumidification-only, ventilation-only and economic
automatic operation and can be overridden at any time (ideally when waking up) by pressing
the button again.
If the timer function is set at the same time, the device will switch off after the set time has
elapsed.
DEHUMIDIFICATION FUNCTION
Using this mode, the appliance dehumidifies the room. Activating this function is therefore
particularly useful in the mid-seasons, i.e. on days (such as rainy days) when the temperature
is pleasant, but the excessive humidity makes you feel a certain sense of discomfort. In this
mode, both the room temperature setting and the fan speed setting are ignored and always
correspond to the minimum. In this mode it is normal for the appliance to operate intermittently.
CHANGE OF SEASON
The change of season must be carried out from the keyboard.
Press and hold the season change button for at least 3 seconds to change the season status.
This operation must be carried out in order to activate the correct logics.
Symbol logic:
SUN = WINTER
SNOWFLAKE = SUMMER
Ventilation only
Night wellness
Dehumidification
Change of Season
