23
E N G L I S H
ASPIRCOMFORT PRO X 380V
SWITCHING THE UNIT ON AND OFF
In order to operate the appliance using the remote control or the touch screen display, it is
necessary to either switch on the main switch which has been provided on the power supply line
(the technician who installed the appliance will be able to be more precise about its position),
or insert the appliance's power plug into the system's socket. Once the described operations
have been carried out, by prolonged pressure (3 seconds) on the symbols on the touch screen
display, or with the remote control, it is possible to manage the system. In order to transmit
commands to the indoor unit, the front of the remote control must be turned towards the
display of the indoor unit. Receipt of the command is confirmed by the buzzer sounding a note
and being shown on the display. The maximum distance at which commands can be received
is approximately 8 metres.
Using the stand-by button, you can switch the appliance off or on. The appliance's control
system has a memory, which means that all settings will not be lost either when the appliance
is switched off or in the event of a power failure. This button is used to activate and deactivate
the device for short periods.
In the event of prolonged standstill of the appliance, it must be switched off by disconnecting
the main switch or removing the plug from the socket.
TEMPERATURE SET MODIFICATION
On the display there are buttons for selecting the desired temperature of the unit;
Whenever the set temperature is changed, the display will also show the change in set point
required.
FAN SPEED MODIFICATION
By pressing this button sequentially, the power supplied by the appliance can be set to 5
settings: Minimum, Medium, Maximum, Dual Power and Automatic.
The higher the power setting, the greater the output of the appliance, but the quieter it is.
The Dual Power function (visible by the flashing of the 3 speed bars on the display and the
scrolling of the 7 bars, red or blue, on the digital thermometer), available only in heating and
cooling mode, provides an overboost for 30 minutes.
The controller then inhibits the function and switches to automatic operation.
By setting the Automatic choice (visible through the scrolling of the 3 speed bars on the display)
the on-board microprocessor automatically adjusts the power, keeping it higher the greater
the difference between the room temperature and the set temperature. In dehumidification
only and night wellness mode, power control is not possible as the appliance can only be
operated at minimum power.
AUTOMATIC FUNCTION
By setting this function, the appliance sets itself up so as to achieve optimal comfort in the
air-conditioned room. Depending on the set temperature, the air conditioner automatically
selects the operating mode (cooling, or heating), and the ventilation speed according to the
room temperature and the detected air quality;
Unit On / Off
Temperature
set modification
Fan speed
management
AUTO function
