CHAPTER 2
CONTR
OLS AND DISPL
AY
EFD1000H PFD Pilot’s Guide
Page 2-8
091-00012-001 REV C
EFD1000H PFD Pilot’s Guide
Page 2-9
091-00012-001 REV C
2.2.1.4. Using the Knobs (Example)
How to Set the Heading Bug (HDG)
1. Rotate the Right Knob to the desired heading value, shown both by the
position of the Heading Bug and the numeric value in the Selected Heading
Field (
Figure 2-5
). The HDG label, Heading Bug and the Selected Heading
Field appears in magenta
2. After 10 seconds of inactivity, the knob defaults to HDG. The HDG label,
Heading Bug and Selected Heading Field value will appear in cyan (
Figure
2-6
).
2.2.2. Navigation Source Select Buttons
1
The three buttons on the bottom of the PFD (
Figure 2-7
) allow the pilot to select the
navigation source for the CDI and Bearing Pointers (
see
Section 4.4.5. CDI Navigation
Source
and
Section 4.4.8. Bearing Pointer Source Selection
for more detailed
information).
Figure 2-5
Editing the HDG field
Figure 2-6
HDG field updated and inactive
Figure 2-7
CDI and Bearing Pointer Source Select Buttons
Single-Line Bearing
Pointer Source
CDI Nav
Source
Double-Line Bearing
Pointer Source
1. Not available with the Pilot PFD
