CHAPTER 4
REFERENCE GUIDE
EFD1000H PFD Pilot’s Guide
Page 4-38
091-00012-001 REV C
4.4.8. Bearing Pointer Source Selection
1
When the 360° Compass mode is selected, single- and double-line bearing pointers are
available (
Figure 4-76
). The bearing pointers are independent of the CDI and provide
supplemental navigation information by pointing to active GPS waypoints or navaids.
By default, the bearing pointers are off and not displayed.
Single-Line Bearing Pointer
Single-Line Bearing Pointer Source Information
Top Line
Distance (NM) to active GPS waypoint
Bottom Line
Waypoint identifier, station identifier (when available, or the tuned
frequency of the associated VHF NAV radio (when available)
Single-Line Bearing Pointer Icon
Double-Line Bearing Pointer
Double-Line Bearing Pointer Source Information
Top Line
Distance (NM) to active GPS waypoint
Bottom Line
Waypoint identifier, station identifier (when available), or the tuned
frequency of the associated VHF NAV radio (when available)
Double-Line Bearing Pointer Source
Figure 4-76
Bearing Pointer Description
NOTE
Distance to waypoint < 100 NM, display is in tenths of
a mile, i.e., ##.#.
Distance to waypoint is 100 – 9999 NM, display in
whole miles, i.e., ####.
Distance to waypoint is > 9999 NM, display is dashed,
i.e., ----.
1. Not available with the Pilot PFD
