70
E. Control
In this section you can define how the camera will react to recovery from power down, long
release from control, and make adjustment to image.
Auto Resume
To decide whether camera will go auto-run after manual control stops for certain time. First
you decide if you want to drive the camera into AUTO-RUN with ON / OFF selection, then
you choose what type of auto-run and how long the camera will start doing it after control
stops.
ON / OFF
To turn this function on or shut it off.
Mode
The AUTO-RUN type you want to have. 6 modes are in option list:
Preset: Go to the selected preset point.
AP<P/T>: Auto-pan (Pan/ Tilt).
AP<P>: Auto-pan (Pan only).
AP<C>: Auto-pan (Circle).
All Pres: Patrol for all preset points.
Group 1 ~ 4: Group scan.
Tour: Tour-scan (mixed groups).
Patrol: Patrol for select preset points (among 1 to 32).
Pattern 1 ~ 4: Pattern scan.
Time
How long before the auto-run will go. Options are 1, 2, 3, 4, 5 and 10 minutes.
Power-on Resume
When this function is set ON and after power retrieves from breaking, this camera will
automatically go the state it was running before power went down.
Preset Freeze
This will keep image at rest when camera is running from one preset to another. It is useful
